Category
Popular
-
Hot Glue Stick – 5pcs 69.00 ₹
-
RGB LED Strip 12V (5 Meter) 349.00 ₹
-
1000uF 25V Electrolytic Capacitor - 2 Pieces 18.00 ₹
-
Submersible Mini Water Pump - 3-6V DC 60.00 ₹
-
12V 7A SPDT PCB Mount Relay 23.00 ₹
SparkFun Breadboard Power Supply Stick – 5V/3.3V
878.00 ₹
AT A GLANCE
- 6-12V input voltage via barrel jack or 2-pin header
- 3.3V or 5V regulated output voltage
- 800mA Operating Current
- ON/OFF switch
- Output voltage select switch
- Power status LED
- PTC fuse protected power
- 5.5×2.1mm center positive barrel jack
- 2.15×0.65″
5 in stock
This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1″ pitch for simple insertion into a breadboard.
Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/5V).
The two sets of four GND and VCC holes are spaced such that when connected to Basic Breadboard both power busses will be powered.
Note: Headers are not supplied. You will need to supply your own headers to connect this board to a breadboard.
SparkFun link: https://www.sparkfun.com/products/13032
Weight | 0.006 kg |
---|---|
Dimensions | 5.5 × 1.5 × 1.5 cm |
Related products
-
RC522 RFID 13.56MHZ Reader Writer Module
110.00 ₹Add to cartAT A GLANCE
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current:13 – 26mA / DC 3.3V
- Standby current:10 – 13mA / DC 3.3V
- Sleep current:<80uA
- Peak current:<30mA
- Working frequency:13.56MHz
- Card reading distance :0~60mm (Mifare1 card)
-
1 Channel 5v Relay
61.02 ₹ (ex GST)Add to cartAT A GLANCE
- Dimensions: 75 mm x 55 mm x 19.3 mm
- Relay colour: Blue
- PCB colour: Blue
- Maximum output of relay: AC250V 10A and Dc30V 10A
- Number of Relays: 1
- Control signal type: TTL level
- Input voltage: 5v
- Compatible with: Arduino, AVR, PIC, ARM, Raspberry Pi etc
Reviews
There are no reviews yet.