Popular
-
Hot Glue Stick – 5pcs
69.00 ₹
-
RGB LED Strip 12V (5 Meter)
349.00 ₹
-
1000uF 25V Electrolytic Capacitor - 2 Pieces
18.00 ₹
-
Submersible Mini Water Pump - 3-6V DC
60.00 ₹
-
12V 7A SPDT PCB Mount Relay
23.00 ₹
ACS712 – 30A Current Sensor
186.44 ₹ (ex GST)
AT A GLANCE
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -30A~ 30A
- Pin 5V power supply, on-board power indicator
- Sensitivity: 66mV/A
- The current sensor chips ACS712ELC-05B
- PCB Board Size: 31 (mm) x13 (mm)
2 in stock
The Acs712 Provides Economical And Precise Solutions For Ac Or Dc Current Sensing In Industrial, Commercial And Communications Systems. The Device Package Allows For Easy Implementation For The User Typical Applications Include Motor Control. Load Detection And Management, Switch Mode Power Supplies, And Over-current Fault Protection.
The Device Is Not Intended For Automotive Applications. The Device Consists Of A Precise, Low-offset, Linear Hall Circuit With A Copper Conduction Path Located Near The Surface Of The Die. Applied Current Flowing Through This Copper Conduction Path Generates A Magnetic Field Which The Hall Ic Converts Into A Proportional Voltage.
Device Accuracy Is Optimized Through The Close Proximity Of The Magnetic Signal To The Hall Transducer A Precise, Proportional Voltage Is Provided By The Low-offset, Chopper-stabilized Bicmos Hall Ic, Which Is Programmed For Accuracy After Packaging.
Current Sensor Chip : Acs712telc-5b Operating Voltage : 5v The Module Outputs 66mv/a This Module Can Measure Up To 30a
| Weight | 0.004 kg |
|---|---|
| Dimensions | 3.5 × 1 × 1.5 cm |
Related products
-
DHT11 Digital Relative Humidity and Temperature Sensor Module
109.32 ₹ (ex GST)Add to cartAT A GLANCE
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
-
TTP223B Module Capacitive Touch Switch
78.00 ₹Add to cartAT A GLANCE
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
Reviews
There are no reviews yet.